[ad_1] ABSTRACT The sets of seizes with shaker which was fabricated and assembled in the Chemical Engineering pilot plant was aimed at providing the students with a machine that will aid them in practical involving…
Read More[ad_1] ABSTRACT The topic of this project is the “selection of lubricating oils for varied engines performance”. The aim is to specify the adequate lubricating oils for different engines. Using some equipment like hydrometer,…
Read More[ad_1] ABSTRACT This project was done to bring to lime light the appropriate method of solid waste handling, separation and utilization, in order to reduce the impact on the environment – environmental degradation. In this…
Read More[ad_1] ABSTRACT The main area covered by this project was a research into the desirability of using locally obtained rubber later as loinder in paint manufacture. Considering the huge amount of money being spent on…
Read More[ad_1] ABSTRACT In this research project, the various nail were subjected to six environments so as to check the effect of the environments on corrosion of the nails. Two sets of nails were used; normal…
Read More[ad_1] ABSTRACT Water Purification Unit or filtration unit is designed in way that it will give a nice result. Like in our filtration, we have sand and carbon filter that were responded to separate the…
Read More[ad_1] ABSTRACT The project was on the construction of a venturimeter. Venturimeter being a measuring instruction was used in determining the flow rate of fluid down a pipe or the rate of discharge in a…
Read More[ad_1] ABSTRACT A temperature control apparatus an “Armfield model was refurbished. The methodology employed were to detect the pulty parts of the equipment especially in the sump where leakages were observed. In the repair, the…
Read More[ad_1] ABSTRACT This research work which is based on safety principles and practice in liquefied petroleum gas (LPG) environment. LPG which is a petroleum fraction produced by distillation of crude oil. It is a hugely…
Read More[ad_1] ABSTRACT The production of high quality foam was carried. The actualization of the production of polyurethane (fibre) foam was made possible by using the components / chemical raw materials such as polyol (polyurethes resin). …
Read MoreBank: UBA
Account No: 1021412898
Account Name: Starnet Innovations Limited
itcoin: Pay 0.0009 Btc to 3KsDJfmSEeR2Wn5qv1UXFQ4cvNFqGwkoFh
Ethereum : Pay 0.030 Eth to
0xDb862176e2842FBBd8849c9Bf58608c4917cC468
Recent Comments